New ATS 24V 32000W Peak 8000W LF Split Phase Pure Sine Wave Power Inverter DC 24V to AC 110V&220V 60Hz, with 120A BC/UPS / LCD Display – Jeep Version

0




Buy Now with Best Price



*Split Phase function:
AC output as belows:
Two white AC output sockets, output is all 110V,
One hard wire terminal marked L1,N, L2,
L1 + N = AC 110V ;
L2 + N = AC 110V ;
L1 + L2 = AC 220V ;
NOTE: can not L1 + N+ L2 .
For AC 220v, 100% full power For AC 110v, 50% half power.
WITH 120A BTY CHARGER function for AC 220v 60Hz home grid.
NOTE: AS THIS IS SPLIT TYPE, LCD only show 220v voltage , watt, amp, did not show 110v spec, pls note, if this you can not accept it, pls think about carefully before buying this inverter.
*Specification :
DC Input Voltage: 24V
AC Output Voltage: 110V & 220V
Regulation: ±5%
Frequency: 60HZ±3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 21V
Input Low Voltage shutdown: 20V
Input High Voltage Alarm: 28V
Input High Voltage shutdown: >29V
No load current draw when power save on: 0.7-0.8A
No load current draw when power save off: 3.5-4.0A
Certificate: CE
*Recycle design, main board, control board or other small board, all can be replaced by yourself; module design, all the tools you need is just screws tools. After 2-3 years dead, just replace PCB board it can has another 2-3 years' life time.
*Warranty time: 2 years for this Jeep Version.(During this time, all PCB parts can be free to offer, but you need pay the shipping cost.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage. 5. one more DC cooling fan we add another dc fan on the inverter, for better cooling & long time using without teamp protection.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage. 5. one more DC cooling fan we add another dc fan on the inverter, for better cooling & long time using without teamp protection.
6. ATS: If the machine is connected to the battery and home mains at the same time, the machine will use Inverter function first. When the battery voltage is lower than 21.5V, the machine will automatically switch to charging mode. In charging mode, the AC output will be from home mains. When the battery voltage rises to 28V, the machine will automatically convert back to Inverter function, when switching the function will not affect the use of appliances.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage. 5. one more DC cooling fan we add another dc fan on the inverter, for better cooling & long time using without teamp protection.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
This is our 2018 newest version split phase power inverter, upon some buyer's request, we upgrade the inverter with more functions than the old ones, then can man operate it more easily and flexible. 1.Voice Selection (Chinese, English) Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection) Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful. 3. DC alarm voltage adjustment (±0.5V) Adjust counterclockwise to reduce DC alarm voltage Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V) Adjust counterclockwise to decrease AC output voltage Turn clockwise to raise the AC output voltage. 5. one more DC cooling fan we add another dc fan on the inverter, for better cooling & long time using without teamp protection.
6. ATS: If the machine is connected to the battery and home mains at the same time, the machine will use Inverter function first. When the battery voltage is lower than 21.5V, the machine will automatically switch to charging mode. In charging mode, the AC output will be from home mains. When the battery voltage rises to 28V, the machine will automatically convert back to Inverter function, when switching the function will not affect the use of appliances.
7. UPS: If the machine is connected to the battery and home mains at the same time, the machine priority to use the home mains electricity, if the home mains electricity is failure, the machine will be automatically converted into Inverter function to run the home appliances. About this new Jeep Version, continuous working time is 30% longer than standard version. And the inside transformer is 30% bigger than standard version.