Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable

0




Buy Now with Best Price



Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable - The ME-ARC is simple to use, yet allows full set-up of all the standard and advanced features available in Magnum inverters.

The ME-ARC also has the option of controlling the advanced features of the ME-AGS-N Automatic Gen Start and the ME-BMK Battery Monitor Kit using a network connection to the inverter. This remote has convenient finger-tip operation, including the new one-knob programming.

*Note: All settings/setup menus in the ME-ARC are compatible with MS-PAE Series inverter/chargers. If you are using the ME-ARC with another inverter/charger (other than the MS-PAE Series), some features and setup menus may not be compatible with your inverter and will not function.

Contact Magnum Energy to determine if a particular feature/setup menus provided in the ME-ARC are compatible with your inverter.

SPECIFICATIONS -

Two-line LCD display screen: Yes

Adjustable search mode: 5 to 50 watts in 5 watt increments

Low battery cutout settings: 9 to 12.2 VDC (12 volt), 18 to 24.4 VDC (24 volt), and 36 to 48.8 VDC (48 volt)

Selectable battery bank sizes: 200 to 2500 amp-hours in 10 amp-hour increments

Selectable battery charge profile: Flooded, AGM1, AGM2, and GEL type chemistries.

Also includes custom voltage adjusment

Adjustable charge rate: 0 to 100% in 10% increments

Adjustable VAC dropout: 60 to 105 VAC

Adjustable LCD contrast: Yes

Factory reset: Resets to factory defaults (tech menu).


Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
LCD Display - The LCD display is a 16 x 2 line (32 characters total), alphanumeric display used for setting up the Inverter/Charger operation, as well as viewing current status or fault messages. ON/OFF Push Buttons (x2) - Allows the inverter or charger to be independently and quickly enabled or disabled
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
LCD Display - The LCD display is a 16 x 2 line (32 characters total), alphanumeric display used for setting up the Inverter/Charger operation, as well as viewing current status or fault messages. ON/OFF Push Buttons (x2) - Allows the inverter or charger to be independently and quickly enabled or disabled
Menu Push Buttons (x5) - The menu push Buttons allow the Inverter or charger to be configured to your specific system preferences. These menus also allow simple access to menu items that can help with monitoring and troubleshooting your inverter/Charger system
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
LCD Display - The LCD display is a 16 x 2 line (32 characters total), alphanumeric display used for setting up the Inverter/Charger operation, as well as viewing current status or fault messages. ON/OFF Push Buttons (x2) - Allows the inverter or charger to be independently and quickly enabled or disabled
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
Magnum Energy ME-ARC50 Advanced Remote Control with 50ft Cable, used on all Magnum Inverter/Charger models in the ME, MM, MS, MS-AE, MS-PAE and RD Series
4-conductor (twisted-pair) telephone cable and includes non-volatile memory (preserves adjustable settings, even if power to the remote or Inverter is removed). LED Indicators - The at-a-glance LEDs provide the inverter/charger status in a straightforward way
LCD Display - The LCD display is a 16 x 2 line (32 characters total), alphanumeric display used for setting up the Inverter/Charger operation, as well as viewing current status or fault messages. ON/OFF Push Buttons (x2) - Allows the inverter or charger to be independently and quickly enabled or disabled
Menu Push Buttons (x5) - The menu push Buttons allow the Inverter or charger to be configured to your specific system preferences. These menus also allow simple access to menu items that can help with monitoring and troubleshooting your inverter/Charger system
Rotary Knob / SELECT button - The rotary encoder knob is similar to a dash radio knob and is used to quickly scroll through and select various menu items and settings. Pushing this rotary knob allows you to "SELECT" a menu item, or to "Save" a setting once it is displayed on the LCD screen