10.0 DC 24V 32000W Peak 8000W LF Split Phase Pure Sine Wave Power Inverter DC 24V to AC 110V&220V 60Hz, with 100A BC/UPS/LCD Display

0




Buy Now with Best Price



*Specification :
DC Input Voltage: 24V
AC Output Voltage: 110V & 220V
Regulation: ±5%
Frequency: 60HZ±3%
Efficiency: 90%
Output Wave Form: Pure Sine Wave
Temperature Protection: 70C
Input Low Voltage Alarm: 21V
Input Low Voltage shutdown: 20V
Input High Voltage Alarm: 28V
Input High Voltage shutdown: >29V
No load current draw when power save on: 0.7-0.8A
No load current draw when power save off: 3.5-4.0A
Certificate: CE
*Warranty: 1 year (Winthin one month since the customer receive this, if the inverter has problem, just contact me on the details, we can send the parts with free charge only one time. If over one month to one year, the shipping cost for the parts will be paid by the customer, but the parts is free.)
*Note: As this unit could have parts loosing caused during transportation, so please DO check item carefully before testing. If the inverter is damaged by the courier seriously please report this to the courier right away.
*If you only connect battery with load, ac cable unconnected, when you switch to battery charger mode, this means power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode, no load current is 0 AMP, every 3 sec., the inverter will detection itself, after the 3 sec., amp will go to 3 amp (stand by power, time: 1 sec., then back to sleep mode, amp is 0), the inverter will repeat the situation, until you switch to power save off (inverter on, down side)
*If customer needs to use refrigerator, can switch the mode to power save on, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0 amp, will save power.
*Warning: Inverter must be switched OFF before connecting/disconnecting batteries or AC input/outputs. Failure to do so may result in inverter damage.
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
2. The caption on the boards is changed from stickers to carving, which cannot fall off, also is more beautiful. 3. (a). The number of the mosfets inside is added from original 24pcs to 40pcs). original main board, go to 4000w teamp will go to 120℃. now 10.0v main board 40pcs, will keep 80℃ at 4000w.
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
2. The caption on the boards is changed from stickers to carving, which cannot fall off, also is more beautiful. 3. (a). The number of the mosfets inside is added from original 24pcs to 40pcs). original main board, go to 4000w teamp will go to 120℃. now 10.0v main board 40pcs, will keep 80℃ at 4000w.
4. 4000W continuous power for 110V or 4000W continuous power for 220V without high temperature protection problem. ( AC 110V: 4000w continue power/4500w 10mins/5000w 5mins/16000w peak power. AC 220V: 4000w continue power/4500w 10mins/5000w 5mins/16000w peak power.)
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
2. The caption on the boards is changed from stickers to carving, which cannot fall off, also is more beautiful. 3. (a). The number of the mosfets inside is added from original 24pcs to 40pcs). original main board, go to 4000w teamp will go to 120℃. now 10.0v main board 40pcs, will keep 80℃ at 4000w.
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
This is our 2019 newest version split phase power inverter, we upgard the design on the new type inverter. The differences between 10.0 version and 8.0 version are as follow:
1. A.We add cooling holes on each side. B.The cooling holes is facing the transformer, that makes the transformer has a good heat dissipation. C. We also add cooling holes on the bottom, which helps to cool down the inverter more quickly. D. Compared the old version, the cooling fan of the 10.0 version is changed from 2000RMM to 4000RMM, the speed of the heat dissipation is twice than before.
2. The caption on the boards is changed from stickers to carving, which cannot fall off, also is more beautiful. 3. (a). The number of the mosfets inside is added from original 24pcs to 40pcs). original main board, go to 4000w teamp will go to 120℃. now 10.0v main board 40pcs, will keep 80℃ at 4000w.
4. 4000W continuous power for 110V or 4000W continuous power for 220V without high temperature protection problem. ( AC 110V: 4000w continue power/4500w 10mins/5000w 5mins/16000w peak power. AC 220V: 4000w continue power/4500w 10mins/5000w 5mins/16000w peak power.)
(b)The temperature for long time working decreases from 100℃ to 60℃, making sure the mosfets keep at a high efficiency of conversion. Long-term maintenance at 60 °C also can extend the service life of MOS. ( the efficiency is only 50% at 100℃, it will increase to 85%-90% at 60℃). (c)The area of heat sink is increased to 2 times than before, which keeps the long-time working maintain at 60℃-70℃. Based on the experiment the temperature will be 15℃ lower than before.